Effective methods and materials for removing flash stains from stainless steel
“Flash” belongs to the category of “harsh” chemical detergents. It leaves white stains on stainless steel, or “stainless steel” for short, especially on faucets in the kitchen, bathroom and sink, and is responsible for dulling the color of the metal… So what are the home steps to get rid of these stains?
It is worth noting that in the case of superficial stains, any clear soft drink may solve the issue, when the liquid is poured on the metal, but in the case of stains that have been there for some time, the following steps are successful.
جدول المحتويات
6 effective steps to get rid of flash stains
“Flash is a “harsh” chemical cleaner that leaves white stains on stainless steel
You can pour the juice of one lemon or half a cup of apple cider vinegar or white vinegar directly onto the stained steel surface to help.
Lemon juice, white vinegar, or apple cider vinegar have acidic properties that make it easier to remove stains.
Lemon juice, white vinegar or apple cider vinegar has acidic properties that make it easier to remove stains
2. Then, sprinkle a small amount of baking soda powder on the juice-soaked surface, which will create bubbles, as baking soda powder is abrasive to dirt and stains.
Baking soda is a powder that scrapes away dirt and stains
3. In the third step, a small amount of toothpaste is a must.
4. Wait 30 to 60 minutes, before using steel wool or a brush to scrub the stain, slowly and gently. Repeat the steps, if necessary.
5. Next, clean the steel surface with a clean cloth moistened with a mixture of warm water and a few drops of dishwashing liquid. Then, wipe with water and dry.
6. Polish the surface with a soft cloth, moistened with a few drops of mineral oil (or olive oil), which will create a protective layer on the stainless steel.
“Epoxy to remove flash stains
Effective methods and materials for removing flash stains from stainless steel
“Enoxy is a ready-made stain remover, especially for flash stains. It is a spray that is applied to stainless steel surfaces stained with white stains from flash use, before passing a cloth towel over them, and helps polish stainless steel surfaces. It’s okay to apply olive oil afterward, as described above.
